Note: The Ruggable pet bed cannot be returned once the vacuum seal on the package has been opened. Please carefully inspect your package to make sure that you’re satisfied with the color and pattern of the outer covers and that the size you ordered is suitable for your pet.
Unboxing:
- Step 1: Carefully open the plastic wrap on the bed, taking care not to cut the bed itself and remove the mattress (center bed) and the bolster cushion (donut-shaped piece).
- Step 2: Allow the bed to unroll and fluff up, which should only take a few minutes.
Bolster Assembly
Note: The outer bolster cover is folded inside of the box.
- Step 1: Lay down the outer bolster cover with the bottom side facing up and unzip it fully.
- Step 2: Insert the bolster cushion into the outer bolster cover, ensuring that the bottom flat side of the bolster cushion is facing up. Then, zip up the cover.
- Step 3: Flip the bolster over and smooth out any wrinkles. Make sure the cover fits evenly and nicely around the bolster cushion.
Mattress Assembly
Note: This step is not needed if the outer mattress cover is already on the mattress cushion when you receive your package.
- Step 1: Insert the mattress cushion into the outer mattress cover, noting that the “TOP” label on the mattress cushion indicates the top of the mattress, which should be facing up due to the memory foam layer.
- Step 2: Insert the mattress cushion into the zippered opening on the outer mattress cover and fully zip it up.
- Step 3: Smooth out any wrinkles and make sure the cover fits evenly and nicely around the mattress cushion.
Full Bed Assembly
- Step 1: Push the mattress down evenly into the center hole of the bolster, ensuring that the mattress sits flat on the floor and the “Ruggable” label is on the bottom.
- Step 2: Smooth out any wrinkles with your hands and make sure the mattress sits evenly and nicely inside of the bolster.