Clean the surface. Before setting up your two-piece Rug System, ensure the area you intend to lay your rug on is free of any dirt, pet hair, or other foreign debris. Cleaning the surface before setup will maximize the performance of the nonslip Rug Pad.
-
Start with the Rug Pad. Layout the Rug Pad with the grippy, rubbery side up, with the horns facing away from you. Roll the Pad from the bottom up, then set aside.
-
Next, get the Cover ready. Smooth out the Cover, pile side down, with the horns facing you. Line up the Pad so the horns are on top of each other. Leave an inch of overhang and roll out the Pad.
-
Flip the Rug System over. Check for misalignment and wrinkles. Roll up any mismatched or wrinkled corners, then roll the cover back out smoothly.