Ensure the area you intend to lay your Bath Mat on is dry and free of any dirt, pet hair, or other foreign debris. Cleaning the surface before setup will maximize the performance of your Bath Mat.
1. Place the Bath Mat Pad on the floor with the grey grippy side down and the black coarse side up. The care tag should be facing the ground.
2. Roll up your Bath Mat Cover with the design-side facing in
3. Line up the corners of the short side of the cover about 1 to 2 inches beyond the edge of the short side of the Bath Mat Pad.
4. Unroll your cover on top of the pad so that the grey underside of the cover clings to the black, coarse side of the pad.
5. Smooth out any wrinkles.
Note: Your Bath Mat Cover should hang over the edges of the Bath Mat Pad equally on all four sides.